Slide toggle

PVC-Free Wall Covering

PVC FREE

These cleaning and care instructions are for the following PVC-free wall covering products: Accord, Dupioni, Floorplan, Hightower, Keystone, Layout, Seamless, Seto and Soba.

General Recommendations

Clean with water based foam or cleaner. Do not saturate with liquids. Do not use dry cleaning solvents.

Regular Maintenance

Normal cleaning of TPO wall coverings should be done with mild ingredients such as soap, detergent and water. If the wall covering is stained and stronger cleaning is required, a pH neutral liquid household cleaner should be used.

Stain Treatment & Spot Cleaning

Treat stains quickly. Stains should be removed as quickly as possible to eliminate any possible reaction between the staining agent and the wall covering. Time is especially important for removing materials containing colours or solvents such as ballpoint ink, nail polish, lipstick, oil shampoo tints, paint, lacquer or enamel and some foodstuffs.

Remove fluids immediately by blotting with a clean, soft, colour-fast absorbent cloth. Excess soiling materials such as chewing gum, asphalt, crayons, paint, nail polish, or tar should be carefully scraped off prior to the other cleaning attempts.

  • Rub the area gently with a soft cloth or sponge that contains a mild detergent solution.
  • If the wall covering pattern has a rough texture, a very soft bristle brush should be used.
  • Rinse off with clean water.
  • Gently towel the area dry.
  • Examine the area and repeat the cleaning procedure if necessary.

Repeated use of stronger cleaners can potentially cause the wall covering to lose its “homogeneous surface appearance” when viewed from different lighting conditions.

Bleach Cleanable

To disinfect, spray a 10:1 ratio water/bleach mixture on the substrate and allow to linger.

RINSE ALL CLEANING AGENTS THOROUGHLY WITH WATER AND WIPE WITH A SOFT CLOTH.

Never mix cleaning agents together. Violent reactions may occur which could result in serious injury. Observe all label precautions when using these and any cleaning agents. Highlight decorative metallic effect wall covering should only be cleaned with mild ingredients such as soap, detergent and water.

RESIDUE LEFT BY CLEANING AGENTS WILL DEGRADE AND SHORTEN THE LIFE AND/OR AFFECT THE PRODUCT’S APPEARANCE IF NOT REMOVED.