Nufelt Acoustic Wall Covering

Cleaning Guide

Cleaning instructions for our Nufelt Acoustic Wall Covering collection.

Through installation procedures or consumer use, fabric may become soiled and require spot cleaning from time to time. The following information is provided as a guideline for the care and cleaning of acoustical fabric made from Polyester fibres. Because this material is made from synthetic fibres, it cleans very well with virtually no damage to the colour or construction itself. Most commercially available carpet and upholstery cleaners will do an excellent job removing stains.

From time to time, additional cleaning methods such as an extraction wand may need to be utilised to remove stubborn or difficult stains.

General Cleaning

As with any stain or contamination, the quick response is the best, especially when done in conjunction with the proper cleaner for the type of stain.

Important: Make sure you have selected the right cleaning agent from the list below before you begin the cleaning process. The categories of stains listed below are based on 1) stains acquired during OEM manufacture and 2) acquired by consumer/ end-user following installation of fabric.

Note: Always check to see that the cleaner will not cause damage to material or fabric, by testing on a small area out of sight.

Note: In many cases listed above, repeated steps may be required to fully extract the contaminant from the material. Use solvent type cleaners in a well-ventilated area.

See over page for Consumer/End User Incidents table.

Note: In many cases listed above, repeated steps may be required to fully extract contaminant from material.

* These items may also be removed through steam extraction method by a professional cleaner or service.

Always check to see that the cleaner used will not cause damage to the material or fabric, by testing on an area out of sight.

Date: September 2022